Round LED Headlight
LED lights are becoming more popular as their perks become increasingly apparent to drivers. They provide brighter lighting and have a long lifespan.
This 7″ Round LED Headlight fits in the buckets of older sealed beam headlight housings and may also be used in other vehicles with 7″ round housings. The ultra-shallow design keeps the classic look of your vehicle.
Brighter Light Output
A growing number of drivers are choosing LED headlights as upgrade and replacement options for their old sealed beam headlight housings. The light emitting diodes (LED) in these lights produce a brighter, whiter and closer to the color temperature of daylight, dramatically improving visibility on the road at night.
In addition, the durable polycarbonate lenses can easily withstand the rigors of off-roading and street driving. And, unlike halogen bulbs that use mercury for the filament and contain a small amount of toxic lead, the LEDs in these headlights do not contain any hazardous materials.
The best-performing LED headlights are produced by manufacturers that specialize in automotive lighting. For example, the Hikari VisionPlus LED headlights produce a very high-intensity light output with precise optics that efficiently direct the light where it is needed to illuminate the road. These headlights are also designed to be serviceable, meaning the proprietary LED cartridge can be unbolted and replaced when it is worn out.
Another manufacturer of high-quality headlights is Vision X. Their 7” round LED headlights have a built-in high/low beam switch that allows drivers to select the desired output level. The higher setting provides a super-bright white light with a high-definition wide-angle beam, while the lower setting produces a dimmer yellow-white light for a more focused low-beam that is still street-legal.
Longer Lifespan
LED bulbs are more expensive upfront than halogen headlights, but they use very little power and require minimal maintenance. They also last a lot longer than halogen headlights, so they can save you money in the long run.
A high-quality set of headlights can make your vehicle look more attractive and improve its performance on the road. However, it is important to know your Round LED Headlight state laws about headlight brightness so that you can comply with them. Some states have regulations about the color and the amount of light that you can output, and some even prohibit the use of certain lights altogether.
If you are looking for a set of upgraded LED headlights to replace the factory bulbs in your classic car, the Holley RetroBright 7-inch round sealed beam is an excellent choice. It provides a brighter, more even, and wider pattern than traditional halogen bulbs, while operating on both 12V and 24V systems. It also features a halo ring park lamp for additional visibility around the front of your emergency vehicle.
The high-quality LEDs in this headlight are rated to provide over 20,000 hours of use. This means that they will stay brighter for much longer than a halogen or HID bulb, and they will only experience about 20% degradation over their lifespan. Additionally, the polycarbonate lens and heavy-duty die-cast housing are designed to withstand shock and vibration damage.
Reduced Emissions
Unlike halogen headlights that emit a dim, sleepy yellow light, LEDs provide an extremely bright white light that instantly wakes you up and increases your visibility on the road. Having bright lights on your vehicle is an essential safety feature that can help you avoid accidents and injuries. According to a recent study, more than half of traffic accidents occur at night and are caused by low-light conditions.
Traditionally, train headlights use parabolic reflectors to focus light into a beam. In order to save energy, researchers designed locomotive headlights that use LED bulbs instead of traditional light sources. LEDs are more energy-efficient and require less power than traditional bulbs, but they have a smaller output than the bulbs used in cars. The challenge was to position the LEDs so they overlap enough to create a strong beam but not so much that they consume too much energy and generate heat.
The VX Series headlights from Vision X were engineered to meet this challenge, and they’re DOT Compliant and come with E-MARK and ADR models for vehicles operating in other parts of the world. They were also developed with Jeeps and Classic Cars in mind, so you can rest assured they’re a perfect fit for your vehicle.
If you’re looking for an upgrade to your NA Miata or other classic car, consider the new RetroBright 7″ round LED headlights from Holley. They’re a perfect solution for classics with sealed beam housings and provide a high and low beam that’s 2x as bright as stock. They’re DOT compliant and include a Z-shaped beam pattern with a start-up gradient welcome halo.
Easy Installation
If you have a burnt out headlight, it’s important to replace it quickly so that your vehicle can stay safe on the road. LED lights are a great choice for replacing your old headlights Round LED Headlight because they provide a brighter light that’s easier to see in poor conditions.
LEDs also have better shock resistance than traditional bulbs. They’re more durable, which is especially helpful for motorcyclists. Cruising the highway at night can be dangerous, and if you’re hit by another driver who doesn’t notice you, it can lead to severe injuries. A LED light can help you stay visible and safe on the road, even if you’re traveling at high speeds.
Installing a new set of LED lights can be a relatively simple task. Most of the time, the installation is as easy as unscrewing the retaining ring and removing the bulb from the housing. Once the light is removed, you can simply screw the replacement headlight into place and replace the retaining ring. You’ll also want to connect the headlight harness back to your vehicle’s wiring system.
Some manufacturers offer special wiring harnesses for their headlights to make the connection process easier. You may need to consult your manual to find out which wires correspond with your headlights’ specific functions, such as high and low beams or turn signal function.