Bi Xenon Projector Lens

The bi xenon projector lens is a great upgrade for your car headlight. It provides a wider and brighter light beam than halogen bulbs. It also has a nice sharp cutting off.

Royalin mini h1 lens is designed to be used with a single halogen bulb or dual xenon high/low beams. This way it will meet European road safe rules.

Size

The Royalin mini h1 is one of the most popular bi-xenon projector lens on the market. This is due to the fact that it is small, easy to install, and offers great performance. It is compatible with most cars and can fit a wide variety of headlights. It also has a clear glass lens pre-installed, making it an all-in-one solution.

This projector can be used for both low and high beams, allowing you to switch between the two modes depending on your needs. It has a side-pole solenoid mechanism that creates a reliable low and high beam pattern when actuated. Its bi xenon projector lens straight fully die-cast shield makes it very consistent in light output. Its low beam has a clear, beautiful cutting line, and its high beam is very bright and far-shooting.

The Morimoto Mini H1 7.0 LHD Bi-Xenon Projector is one of the most advanced projectors on the market, offering an amazing combination of modern technology and excellent performance. It produces a powerful and wide low beam that will outshine most OEM projectors, and its high beam will penetrate for hundreds of meters at night. This projector is a great choice for anyone looking to upgrade their factory headlights, and it’s worth the price in terms of the improvement it will make on your car’s visibility. It’s also very easy to retrofit, and it can be done in the comfort of your garage with minimal modification.

Brightness

Xenon HID Projectors are more intense than traditional halogen bulbs. This is due to the lighting discharge and the design of the projector. Because of this, it is important to install your HIDs into a projector that is designed for them. This will prevent the projector from failing due to overheating or being damaged. Additionally, if you install a Xenon HID bulb into a projector that is designed for halogen bulbs, it will cause massive amounts of glare for oncoming drivers.

If your vehicle has a high beam and low beam on one headlight, you can upgrade it with bi-xenon projector lens. This mode uses an oval reflector to focus light in the headlight and has a shield that can rise up or down to switch between high and low beam. This is controlled by the solenoid and ensures that your vehicle does not blind other traffic.

These projectors are the original line that put Morimoto on the map in the aftermarket world of HID lighting. They are easy to install and feature a curved cutoff shield to ensure your highs stay focused on the road without blinding other drivers. The lenses are AR clear and give off a stunning amount of light on demand. Their ease of installation and incredible performance make these the best Xenon HID Projectors on the market.

Safety

The primary job of a headlight system is to produce enough light to conform with road safety standards. This is achieved by using a projector lens to create the high beams. It also prevents glare from oncoming drivers. This is why more and more car owners choose to install a xenon projector lens in their front headlamps.

A hd projector lens can be used with halogen or xenon bulbs and can even support LEDs. Unlike plug and play xenon kits, which are designed for halogen bulbs, a projector is compatible with both types of lights. However, it is important to make sure that the original headlight chrome reflector is compatible with a projector. This is because a xenon bulb’s high temperature will degrade the original reflector and cause the lighting to fade quickly.

A bi xenon projector has a built-in cut-off shield that is activated in low-beam mode to avoid glare from oncoming traffic. Its high-beam mode is activated by a solenoid that drops the cut-off shield to allow light to escape above it, creating a higher output performance than the original factory halogen headlight.

In addition, a bi-xenon projector has an adjustable mirror that allows you to adjust the projection angle of the headlight. This is especially useful if you have a modified vehicle. Its small size makes bi xenon projector lens it easy to fit into the car’s chrome reflector bowl. Royalin mini h1 is one of the most popular bi-xenon projectors for this reason. It is available in different modes to suit a variety of cars.

Design

Generally, a bi-xenon projector lens is able to produce a high and low beam. This allows for a large luminous flux distribution without the need for two separate ballasts or hid bulbs. It also allows you to use a single hdmi plug for both high and low beams. This is a great option for drivers who want to upgrade their car headlights.

It is important to note that not all projectors are designed the same way. You will need to choose a bi-xenon projector that is compatible with the type of bulbs you plan on using. This will ensure that your bulbs are properly seated and the projector is working at its best.

For example, the Aozoom D2S bi-xenon projector is a great choice for any person looking to replace their OEM Hella 5G headlights with a more modern design. This projector uses the same basic concept as the original headlights, but it has improved optics and a larger luminous flux distribution. The result is a brighter low beam with an incredible hotspot, while the high beam remains impressively powerful and penetrating.

The Aozoom D2S is also very easy to install. To install the projector, you simply remove your fog light, put the threaded mounting shaft through a pre-existing hole in the rear of the reflector, add the alignment plate, tighten the lock ring, and re-seal the fog lights. There is minimal cutting required and the results are well worth it!

Upgrade Your Headlights With a Bi Xenon Projector Lens

If you want to upgrade your headlights with a powerful bright high beam, we highly recommend this bi xenon projector lens. It will give you an unexpectd new visual experience when driving on the road.

It includes a cutting shield, solenoid and a xenon bulb. When the solenoid is energized, it will push or pull the cutoff shield and create a high beam.

High & Low Beam

A bi xenon projector lens has both a high and low beam. Inside the projector, there is a light cutoff shield that is on a hinge. When the car is armed for high beam, the solenoid sends power across and pulls or pushes this shield down, bi xenon projector lens thus exposing more of the projector lens and creating the high beam pattern. When the high beam is deactivated, the cutoff shield goes back to its normal position.

When you use a bi xenon projector lens, it is much easier to switch between high and low beams without causing glare for other drivers on the road. Some people try to install a simple plug and play xenon kit (without the projectors) into their car headlights. But this will not be safe for you and other drivers on the road. Your car headlights were originally designed for halogen bulbs and the xenon bulb generates high temperatures that will distort the original chrome reflector bowl.

A bi xenon projector lens will solve this problem and will help you drive safely at night. When you buy a projector lens, make sure it meets your country driving standard. For instance, if your country drives on the LHD, you should get a LHD projector lens. Similarly, for RHD countries, you should buy an RHD projector lens.

Dual High Beam

Many people today choose to throw a simple plug and play xenon kit (without projectors) into their car in hope of improving night vision, but this is dangerous for other road users. Without the proper xenon projector lens, the light beam does not converge and creates glare to other drivers on the opposite side of the road. This is because the original headlight chrome reflector was designed for halogen bulbs and not xenon.

The only solution for this problem is to get a bi-xenon projector lens that can do both high and low beams on one headlight. Basically, the projector has a “shield” that stops a part of light coming through when in high beam pattern and the projector solenoid activates the shield down when you turn on your high-beam lights. Then when you switch to the low-beam mode, the shield rises up again to prevent blinding other traffic.

Royalin offers different sizes of bi-xenon projector lenses ranging from 1.8 inch to 3.2 inch, to fit most popular car models like Kioto Q5, Honda Civic, Evox-R and Hella G5 etc. All of our bi-xenon projects are DOT and ECE approved, with a sharp cutoff and great light output. This is a huge improvement over those cheap HID kits that are so popular out there. Royalin xenon projectors will make your car brighter and safer at night!

Light Output

The most important thing to consider when installing a new projector lens is the light output. Whether you’re looking for more intense HID bulbs or just want to upgrade your halogen bulbs, you need to get the best quality lenses. The Royalin mini h1 bi-xenon headlight projector lens is the perfect solution for anyone looking to improve their car’s light output. This projector lens has been designed to fit in the original fog lamp bezel with no drilling or grinding required, and it works with all H4, H7, and most Xenon bulbs.

It also comes with a clear glass lens pre-installed, which means you’re getting the most out of your headlights. Additionally, it features a high-quality electromagnetic solenoid with an impressively low stuck rate and switching frequency.

The reason why it’s so popular is because it allows you to upgrade your OEM headlights to bi-xenon, allowing you to enjoy more lighting on the road without worrying about stray lights blinding other drivers. The bi-xenon headlights have two bulbs, one for low and the other for high beam. The shield inside the housing is on a hinge, so when you activate your high beams, the projector solenoid pulls it down to expose more of the light. Once the high beam is turned off, the shield will retract to stop any of the light from shining beyond the cut-off line, preventing it from blinding oncoming traffic.

Installation

Some people install a simple plug and play HID kit (without projectors) into their halogen headlight in order to get xenon light. However, the result is not safe for themselves and other road users because the light beam is deformed, causing glare to others. The xenon projector lens solves this problem because it brings a nice sharp cutoff and a bright hotspot for the car, making the driving much safer.

Royalin mini h1 bi-xenon projector lens inherits the outstanding high beam of Hella 5G and enhances the low beam pattern for a better distribution of the light and a stunningly wide and even light output. It also bi xenon projector lens offers a super-strong, very concentrated hotspot which makes it the best projector for LED bulbs.

The key to the bi-xenon function is a special “shield” which can be pulled or pushed down by the projector solenoid depending on whether you’re running on high or low beam. When the solenoid is activated for high beam, it pulls down the shield to expose more of the light through the lens and creates a higher brightness than your halogen headlights. When you turn off your high beams, the shield rises up again to prevent blinding other traffic on the road. Royalin bi-xenon projectors are DOT and ECE approved to ensure your safety. They are easy to install, just remove your fog light, insert the threaded mounting shaft with the pre-existing hole in the rear of your reflector bowl, add the locking ring and tighten it – minimal cutting is needed.