Cable Tray Roll Forming Machine

Cable tray roll forming machine is designed to produce different sizes of cable trays. It is equipped with a hydraulic uncoiler, servo feeding, mechanical punching machine, pre-shearing device and gearbox driving roll forming mill.

Strut framing channels are used in electrical, plumbing and utilities applications for various types of mechanical support and wire management products. Yoder has developed robust strut roll forming solutions that are able to provide production of stainless steel strut profiles and side rails at full line speeds.

Optimal Production Efficiency

Cable trays are used to support insulated cables or wiring for power, communication and distribution. They are an economical alternative to open wiring or conduit systems. They provide space for cables, allowing them to be easily installed or moved as needs change.

Our cable tray roll forming machines can produce different sizes of solid or ventilated cable trays with pre-punched holes. The production line includes hydraulic uncoiler, leveler device feeding guide, mechanical punching machine, gearbox driving roll forming mill and product out conveyor. The line can be equipped with shearing and bending devices to make various profiles of light steel keel, as well as replace the punching moulds easily.

Yoder has developed robust strut framing channel solutions to support regional manufacturers and cable tray roll forming machine high production OEM producers alike. Our strut design enables producers to produce stainless steel and taller section strut at full line speed capability. Most other strut tooling designs limit production speed on these higher profile sections due to material galling and marking.

Our C purlin roll forming machine produces the structural components called c or z purlins in steel construction. These studs span parallel to a building eave and are supported by rafters or walls. They are commonly used for insulated or non-insulated roofs and walls, as well as in walls supporting utility and air handling systems.

Low Maintenance Costs

A cable tray is a common electrical wiring support system in commercial and industrial construction. The system supports insulated cables and wiring for power control, distribution, and communication. This system is a cost-effective alternative to traditional open wiring or wire conduit systems. It allows for faster and easier installation of new power, communication, and lighting. The cable tray roll forming machine can produce a variety of widths and heights. The system can also be configured with different punching designs and hole patterns.

Whether you are manufacturing strut framing channels, wire management products, or ladder cable trays, Yoder offers robust Strut Cable Tray Roll Forming Solutions that provide a high-quality end product with minimal maintenance requirements. These systems may include features such as inline notching, embossing, and stencilling to help differentiate your finished product. Yoder can also configure a combination strut tooling design that enables you to produce multiple types of strut products with a single installation.

Before you start the cable tray production line, you should check the temperature and the voltage of the equipment to ensure they are within the specified limits. You should also take safety precautions such as checking that there is no entanglement or looseness in the internal wires. Finally, you should always test the cable tray roll forming machine in winter to make sure it can operate at low temperatures.

Simple Operation

As the name suggests, this machine is designed to produce cable trays. These are used to support insulated wire electricity, communication control and instrumentation cables. The trays can be solid or ventilated and have pre-punched holes. They are widely used in commercial and industrial construction. The trays are more cost-effective than open wiring or cables conduit systems.

This line consists of an automatic hydraulic uncoiler, leveler, servo feeder and punch press, mechanical punch machine with dies, a gearbox driving the roll forming mill and a cutting unit. It can be used to fabricate either GI or MS cable tray roll forming machine trays. It also has a control box and collection table. Its duplex structure makes it easy to change width, allowing the machine to produce a variety of sizes.

The system can be combined with a strut framing channel solution to offer complete solutions for manufacturers of side rails and struts. Yoder has developed several tooling designs to cover a wide range of strut framing channels, including high-speed inline notching, embossing and stencilling. These systems are ideal for both regional fabricators and high-production OEM producers.

Strut framing channels are frequently used for electrical and mechanical supports in construction applications, such as lighting fixtures and HVAC systems. They are also used to support drywall and other building materials, as well as utilities and air handling ducts.

Easy Maintenance

In addition to being able to manufacture a variety of length sizes and types of cable tray, the machine also allows for easy product size exchange. This is possible by simply moving the entire line, including all rollers and cutting blade positions. This saves time and energy, as well as valuable money for customers.

The complete line consists of a hydraulic uncoiler, servo feeding, mechanical punching machine, pre-shearing device and gearbox driving roll forming mill. This can produce side rail and rung components for cable trays, ladders and wire management products as well as stainless steel profiles. Various combinations of tooling can be supplied to suit each customer’s application and production requirements, which may include notching, embossing or stencilling, for example.

The PLC control system makes operation of the cable tray roll forming machine simple, easy and safe. The touch screen enables human-machine interaction, as well as the ability to store specific product data for future use. The equipment is regularly lubricated to maintain the optimal operation of chains, wheels and bearings. This ensures a long service life and high efficiency. It is highly suitable for industrial applications, which require high quality metal building materials. Suitable material includes cold rolled coils, galvanized coils and general carbon steel. The forming bed is cast iron and tempered, to eliminate internal stress and reduce the risk of deformation of the fuselage.

Changing the Mold on a Cable Tray Roll Forming Machine

In industrial and commercial buildings, cable tray is used to support insulated cables for power distribution, control, and communication. It’s a cost-effective alternative to open wiring or cable conduit systems.

Yoder offers robust strut roll forming solutions for producing high-quality side rail and rung components for the fabrication of cable trays, ladders, and wire management products. These systems are designed for a wide range of hole patterns, material thicknesses, and profile features.

Easy to operate

Cable tray is a type of support system for insulated cables and wiring. It is commonly used in commercial and industrial construction as an alternative to open wiring and cable conduits. It provides maximum ventilation and a quick way to add new wires or electrical equipment. It also prevents electrical or power failure by supporting the cable in a closed frame.

A cable tray roll forming machine is easy to operate, and it is designed for high-volume production. It can be controlled by a PLC and requires only a few inputs to start the manufacturing process. It is important to keep the machine clean, as it will affect the quality of the final product. It is also essential to regularly check the advance and retreat of the oil cylinder, the cutting and resetting function, and the chain cover to ensure its proper operation.

Strut framing channels are used in many applications and require a wide range of hole patterns, material thicknesses and profile features. Yoder has developed robust strut roll forming systems to meet these needs, including a combination strut tooling design that allows a single installation to produce a variety of strut sizes. This is a major advantage for fabricators who must change tooling when switching between strut sizes. It is also possible to make different sized cable trays with the same machine, by changing the line width or punching position.

Easy to maintain

Cable trays are a popular choice for commercial and industrial wiring. They are used to support insulated wires and cables for power distribution, control, and communication. These systems are quick to install, economical, and flexible. They also protect electrical wiring from tripping and fire hazards. They are available in a variety of designs and can be customized to fit specific requirements.

A cable tray roll forming machine can be used to produce both solid and ventilated cable trays. Its adjustable width makes it easy to match the dimensions of existing constructions. It is also easy to operate and requires a small amount of maintenance. It is also an ideal solution for new builds.

It is important to maintain a cable tray roll forming machine properly. It is best to lubricate the moving parts with oil cable tray roll forming machine on a regular basis to reduce wear and tear. It is also important to regularly clean the machine and inspect the mechanical components for damage.

Depending on the material, the cable tray market is segmented into steel and aluminum. The growth of the steel segment is attributed to its increased load-bearing capacity and high mechanical strength. In addition, the low installation costs and ease of maintenance will further drive its growth. Moreover, stainless steel cable trays have a better corrosion resistance than other materials.

Easy to change the mold

If you are a producer of electrical cable tray, it may be necessary to change the mold on your roll forming machine from time to time. This can help you improve your production process and increase your productivity. Changing the mold can also help you produce better quality products. This process is not easy, but it can be done with the right tools and equipment.

The first step in changing the mold is to remove the old one from the machine. This can be accomplished with a hydraulic punch. Then, you can replace it with a new one. The machine will automatically adjust to the new specifications. The new die will allow you to produce a wide range of different sizes.

Ladder cable tray is a cold-formed steel structure in which cables and wires are placed. It is used to carry power and control cables in residential and commercial buildings. It has a unique design that allows for maximum ventilation. It is available in both galvanized and stainless steel.

There are several types of cable tray roll forming machines on the market, and each one has its own advantages and disadvantages. Some have flexible moldings, while others use fixed or cast molds. The latter type of molds can be adjusted to different diameters, but they are more expensive than flexible moldings.

Easy to install

Cable tray systems are used to support insulated wires and cables for power distribution, control, and communication in commercial and industrial construction. These systems provide a cost-effective alternative to open wiring and cable conduit systems. They are also ideal for situations where changes in electrical wiring are anticipated. In addition, they are easy to install, as they require fewer fastening points than a conduit system.

A cable tray roll forming machine is cable tray roll forming machine designed to produce solid or ventilated cable trays, and can be customized to meet specific requirements. It can also be designed with complex hole patterns. The machine can also produce ridge capping. It can be made of stainless steel or aluminum alloy, and is capable of producing different length sizes and heights.

The cable tray roll forming machine is equipped with a decoiler, leveling system, punching machine, and forming system. Its cutting device is equipped with an automatic blanking unit and can produce a wide range of profiles with varying thicknesses. In addition, the system features a high-strength, low-stress strip feed that ensures a consistent material supply. Its design makes it possible to produce a variety of products with one machine and only minor tooling set changes. Moreover, it has a fast strip changeover time. This allows for a quick, cost-effective production process. In addition, the machine is easy to install and can be operated by a single person.